Built for speed - Reduces deployment time

• The HeartStart FR3 automatically powers on when you open the carry case so you can focus on pad placement. Pre-connected peel and place SMART Pads III, with no foil pouch to open, reduce deployment time.

Small and lightweight - Easy to carry along with other equipment

• As the smallest and lightest professional-grade AED available among leading global manufacturers, the HeartStart FR3 weighs only 3.5lbs. It is designed to be rugged, reliable, and ready to use.

SMART CPR - Patient specific treatment advice

• Receive patient-specific guidance with Philips SMART CPR for the most appropriate initial therapy – CPR or defibrillation – even for shockable rhythms.

Bright display - High resolution LCD screen for clarity

• In severely degraded environmental conditions, voice prompts may not provide enough guidance. The bright, color LCD display of the HeartStart FR3 clearly shows text or text with ECG.

Infant/Child key - Simplify the rescue of a child

• Insert the Infant/Child Key to automatically decrease the defibrillation therapy and implement the configured infant/child CPR protocols.

Data management - Download and forward event data

• Having event data readily available can help facilitate retrospective review by medical directors and program managers. Philips portfolio of data management solutions supports a culture of continuous improvement and excellence.

Quick Shock Feature - Minimize chest compression interruptions

• CPR is even more vital to survival than previously realized. Rapidly delivering a shock after chest compressions is critical. The HeartStart FR3’s Quick Shock feature reduces the time between hands-off and shock delivery.

Specifications

 Defibrillator

• Models
  • 861388 (text display)
  • 861389 (ECG and text display)
• Includes: Supplied with AED, primary battery (1), SMART Pads III (1 set), printed instructions (Setup Guide) and CD-ROM (Administrative Reference)
• Waveform: SMART biphasic Truncated Exponential waveform parameters adjust as a function of patient impedance. Adult nominal peak current 32A (150J into a 50 ohm load); pediatric nominal peak current 19A (50J into a 50 ohm load) using optional Infant/Child Key
• Shock delivery: Via defibrillator pads placed in the anterior-anterior (Lead II) position for adults; anterior-posterior position for infants and children under 55 lbs. (25 kg) or 8 years old
• Controls: On/Off button, shock button, option buttons. Auto-On feature, when used with the optional FR3 carry case, enables FR3 to power up when case lid is opened
• Indicators: High-resolution color LCD, beeper, voice prompts, tones and chirps, audio speaker, connector socket, ready light, shock button
• Advanced Mode: Configurable using optional HeartStart Configure software

ECG Display

• Screen: LCD color display, 320 x 240 pixels. 2.8" x 2.1" (7.2 cm x 5.4 cm)
• Bandwidth: 1 Hz to 30 Hz (-3dB), nominal (non-diagnostic)
• Monitored Lead: Lead II using anterior-anterior adult pads placement 

Physical

• Size: 2.7" high x 5.3" wide x 8.7" deep (6.9 cm x 13.5 cm x 22.1 cm)
• Weight: 3 lbs. 8 oz. (1.6 kg) with FR3 standard battery installed

Environmental/physical requirements

• Sealing: Meets IEC529 class IP55 with battery installed
• Temperature: Operating/standby: 32°–122°F (0°– 50°C)
• Altitude: 0 – 15,000 feet (0 – 4,572 meters)
• Shock/drop: Meets MIL-STD-810F 516.4, Procedure IV
• Abuse tolerance: (After a ibe-meter drop to any edge, coer, or surface in standby mode)
• Vibration: Meets MIL-STD-810F 514.5 C-17

Bluetooth 2.0 Class II Wireless Transceiver Module (optional)

• Function: Transmit retrospective event data or configuration setting wirelessly

Patient analysis system

• ECG analysis: Evaluates impedance of defibrillator pads for proper contact with patient skin, evaluates the ECG rhythm and signal quality to determine if a shock is appropriate; also detects artifact and pacemaker
• SMART CPR: Evaluates key characteristics of the presenting VF and determines the initial therapy: shock first, or CPR first quickly followed by a shock
• Sensitivity/specificity: Meets AAMI DF80 requirements and AHA recommendations for adult defibrillation
• Quick Shock: Typically arms in <8 seconds from the end of the "Stop CPR" prompt

FR3 primary battery

• Type: 12 VDC, 4.7 Ah, lithium manganese dioxide long-life primary cells
• Capacity: Typically 300 shocks or 12 hours of operating time at 77° F (25° C) when configured for monitoring after No Shock Advised (NSA)
• Standby life: 3 years minimum when stored under standby environmental conditions (battery installed)
• Shelf life: 5 years

SMART Pads III

• Applications: Disposable, multifunction defibrillation pads for adult or infant/child patients. Time-saving peel and place pads can be removed from packaging and stored in the FR3 carry case. Pads can be pre-connected to FR3, which enables testing during FR3's routine self-test.

Infant/Child Key (optional)

• Function: Selects therapy for infants or children under 55 lbs. (25 kg) or 8 years old

FR3 data card (optional)

• Function: Stores a minimum of 8 hours of ECG, event, and if configured, voice recording. Can also be used for configuring FR3.

Automated and user-activated self-tests

• Automatic self-tests: Test inteal circuitry, waveform delivery system, ECG acquisition, temperature, status (or readiness) of attached accessories (SMART Pads III and FR3 data card) and battery
• Automated self-test frequency: Daily, weekly, monthly, power on, and runtime during all modes of operation
• User initiated tests: Automatic self-tests plus tone, display, and button performance

FR3 training battery and training pads (optional)

• Function: Places FR3 into a scenario-based training mode and simulates shock therapy
• Type: 10.8 Volt, 4.5 Ah Li-ion battery